CarPlan Demon Snow Foam Car Shampoo with Gun, 2 L

Description

CarPlan Demon Snow Foam Car Shampoo with Gun:

1. Formulation: Specially formulated to create a dense foam that clings to paintwork, effortlessly lifting dirt and contaminants from the surface.
2. High-Performance Detergents: These powerful detergents remove all traces of traffic film, dirt, and grease, leaving a spotless, streak-free, shiny finish.
3. Easy Application: Simply attach it to a hose pipe and spray it onto the paintwork—no pressure washer required.
4. Safety Warning: Be cautious as it can cause serious eye irritation, skin irritation, and may trigger allergic skin reactions.

Here’s a step-by-step guide on how to use the CarPlan Demon Snow Foam Car Shampoo with Gun for effective car washing:

1. Preparation:
   • Park your car in a shaded area to prevent the shampoo from drying too quickly.
   • Gather your supplies: the shampoo, a hose pipe, and the foam gun attachment.
2. Dilution:
   • Fill the foam gun reservoir with water (usually up to the marked level).
   • Add the recommended amount of shampoo (check the product label for specific instructions).
3. Attach the Foam Gun:
   • Connect the foam gun to your hose pipe.
   • Adjust the foam gun settings (if applicable) to achieve the desired foam consistency.
4. Foam Application:
   • Start at the top of your car and work your way down.
   • Spray the foam evenly across the entire surface, covering the paintwork, windows, and wheels.
   • Allow the foam to dwell for a few minutes. This helps loosen dirt and grime.
5. Agitation:
   • Use a soft sponge or microfiber mitt to agitate the foam.
   • Gently scrub the surface, paying attention to stubborn spots.
   • Rinse the sponge or mitt frequently.
6. Rinse Off:
   • Rinse the car thoroughly with clean water using the hose pipe.
   • Make sure all foam and dirt are washed away.
7. Final Rinse:
   • Remove the foam gun attachment.
   • Rinse the car again to ensure no residue remains.
8. Drying:
   • Use a clean microfiber drying towel to dry the car.
   • Pat the surface gently to avoid scratching.